Krystaline Block F bucket.

KRYBF01

Krystaline Block F

Krystaline Block F

1.5KG/ML

Krystaline Block F is a special crystalline mortar formulated for sealing construction joints, cracks, or tie holes in concrete. It combines high adherence, rapid curing, and permanent waterproofing thanks to its unique microcrystal-generating chemistry.

Use in Mérida and Yucatán:

In Mérida's humid climate, and in cisterns, basements and pools where water seeps through cold joints, cracks or tie holes, Krystaline Block F is worth considering for fast repairs. According to its technical data sheet, it waterproofs under both positive and negative pressure, is suitable for contact with drinking water, self-seals cracks up to 0.5 mm and has an initial cure of 20 minutes at 25 °C, so mix only what you can apply in 10 minutes. The data sheet calls for opening the crack or joint into a rectangular "U" channel at least 2.5 cm wide and 3.5 cm deep (never a "V"), applying it on a saturated surface without standing water and, if water is actively flowing, stopping it first with Krystaline Plug. In tropical climates it recommends storing the product in a cool place.

Benefits:

  • Seals non-moving joints, cracks, and tie holes with permanent waterproofing

  • Easy mixing and application, even in damp environments

  • Resistant to high hydrostatic pressures

  • Can be used for interior or exterior repairs

Applications:

Joints in tanks, basements, water reservoirs, elevator pits, tunnels, retaining walls, and any structural joint or crack in concrete.

Yield and Presentation:

20 kg buckets. Typical consumption: 1.5 kg/linear meter (may vary by joint size).

Warranty:

10 years when installed according to technical sheet.

Compatibility:

Designed for use with Krystaline 1 or as part of the Krystaline joint repair system.

Application Tips:

Surfaces must be clean, open-pored, and saturated surface dry (SSD). Mix 3.5 parts powder to 1 part water for a stiff paste. Apply and compact well into joints.

Warnings:

Do not use for expansion joints or cracks with active movement. Product is alkaline: always use appropriate PPE.

For full technical information or personalized advice, contact us at: materials@formm.mx

Back to Materials