Krystaline 1 Bucket.

KRY101

Krystaline 1

Krystaline 1

1.5KG/M2

Krystaline 1 is a surface-applied crystalline waterproofing slurry designed to penetrate concrete and create a permanent, integral barrier against water and contaminants. It actively forms microcrystals within the concrete matrix, blocking pores and hairline cracks while providing long-term protection even if the surface is worn or abraded.

Use in Mérida and Yucatán:

In Mérida's humid climate, and in foundations, basements, cisterns, pools and potable-water tanks across Yucatán, Krystaline 1 is worth considering as a surface-applied crystalline slurry when concrete needs to become its own waterproof layer. According to its technical data sheet, it seals cracks up to 0.5 mm, waterproofs from the positive or negative side, is suitable for contact with drinking water and reactivates in the presence of moisture; mix only what you can apply in 20 minutes (initial cure about 60 minutes at 25 °C) and prefer two coats under high hydrostatic pressure. Apply it on clean, open-pore concrete that is saturated but not ponded, then wet-cure with a fine mist 2–3 times a day for three days—and more often in heat or wind—while protecting the treatment from rain and standing water. The data sheet notes it is effective only on rigid concrete structures and may not reliably seal cracks or joints that keep moving.

Benefits:

  • Blocks water penetration by filling pores and microcracks with active crystals

  • Can be applied to both new and old concrete surfaces

  • Remains effective even if the surface layer is worn

  • Suitable for positive or negative side waterproofing

  • Protects steel reinforcement from corrosion

  • Reduces maintenance and repair costs

Applications:

Basements, foundations, retaining walls, tanks, swimming pools, tunnels, water treatment plants, and any concrete element exposed to moisture.

Yield and Presentation:

Available in 20 kg buckets. Typical yield: 1.5 kg/m2 in a single layer or 0.8 kg/m2 per coat for two coats.

Warranty:

10 years when installed as per technical specifications.

Compatibility:

May be used in conjunction with other Krystaline repair mortars and joint treatments.

Application Tips:

Apply only to thoroughly cleaned, open-pore, saturated-surface-dry concrete. Mix as directed and apply with a stiff brush in two coats if required.

Warnings:

Product is caustic when mixed with water. Use protective gloves, eyewear, and clothing.

For full technical information or personalized advice, contact us at: materials@formm.mx

Back to Materials